How to get a wifi hotspot in your phone
A bunch of you have asked about how to get your phone to work with wifi, and I have the following advice for you.
If you’re using a compatible phone with the same hardware, you should have no problem.
All you need to do is turn on your wifi router, install the software and then wait for the router to connect to the network.
After the router has connected, you can enable it and configure your phone.
Wifi hotspot can be a little tricky.
Here are a few simple steps to get it going:Go to Settings on your phone and tap on Wireless, then turn on Wifi.
When you’re done, tap on WPA2 and you should see a box with a WPA password.
Enter that and you’re good to go.
To enable WPA1, you’ll need to install the wpa_supplicant package.
You’ll need the wireless module that is included in your router.
To disable WPA, you need the WPA supplicant module.
It’s included in most routers and can be installed in the same way.WLAN, the most common type of wireless access point, is the one you want to use, but you can also use WiMAX, which has a much better wireless reception.
You can find out more about WiMAX here.
The next step is to get the WiMAX drivers for your phone installed.
You need the driver package for your router, which you can find here.
You also need the drivers for the wireless adapter that comes with your phone, which is the wireless card that your router plugs into.
Now you’ll be able to connect your phone directly to the router and access all the hotspots it offers.